How Do I Use The Samsung WEP300 Bluetooth Headset?
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide.
- Never disassemble or modify your headset for any reason. Doing this
may cause the headset to malfunction or become combustible. Bring the headset
to an authorized service center to repair it or replace the battery.
- When using your headset while driving, follow local regulations in the
country or region you are in.
- Avoid storage at high temperatures (above 50° C/122° F), such
as in a hot vehicle or in direct sunlight, as this can damage performance
and reduce battery life.
- Do not expose the headset or any of its supplied parts to rain or other
liquids.
|

|
At very high volumes, prolonged
listening to the headset can damage your hearing.
|
|

|

|
If your headset responds slowly, stops responding,
or freezes, press the reset button on the back of the
headset with a pointed tool.
|
|
|
Put the adapter into the jack on the headset and into the
electrical outlet.
Charge the headset until the red indicator light turns blue.
|

|
|

|
Do not attempt to charge the headset
with anything other than the adapter provided.
|
|

|
You can use your headset while
charging.
|
|
To turn the headset on, press and hold the Multi-function button
until the blue indicator light flashes 4 times.
To turn the headset off, press and hold the Multi-function button
until both blue and red indicator lights flash.
- Standby mode: The headset is waiting for a call. The blue
indicator light flashes every 3 seconds.
- Active mode: The headset has a call in progress. The blue
indicator light flashes every 8 seconds.
- Pairing mode: The blue indicator light stays lit. You can
discover and connect to your headset on your phone.
- Low battery mode: There is less than 10% of battery power
left. The red indicator light flashes. You must recharge the battery.
- Enter Pairing mode.
- Turn off your headset and press and hold the Multifunctionbutton
until the blue indicator light remains lit after blinking.
- If you turn it on for the first time, it proceeds into Pairing
mode immediately.
- Search for and pair with your phone according to your phone’s user
guide. (Bluetooth PIN: 0000, 4 zeros)
- If the pairing is successful, the blue indicator light will
flash 10 times rapidly before entering Standby mode.
- If the blue indicator light remains lit, retry pairing.
|

|
When the headset and the phone
are paired, the headset attempts to reconnect automatically
each time it turns on. Otherwise, press the Multi-function
button to reconnect.
|
|
Some features may not be supported by your phone.
- In Standby mode
- Press the Multi-function button to:
- Answer an incoming call
- Redial the last number called
- Press and hold the Multi-function button to:
- Make a voice-activated call
- Reject an incoming call
- Press and hold [+] and [-] at the same time to turn the indicator
light on or off.
- In Active mode
- Press the Multi-function button to:
- End a call
- Transfer a call from the phone to the headset
- Press and hold the Multi-function button to:
- Place a call on hold
- Answer a second call
- Retrieve a call on hold
- Press [+] or [-] to adjust the volume.
- Press and hold [+] or [-] to turn the microphone off or on.
FCC
FCC ID: A3LWEP300
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
includinginterference that may cause undesired operation.
The device and
its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter.
Users are not permitted to make changes or modify
the device in any way.
Changes or modifications not expressly approved by
Samsungwill void the user’s authority to operate the equipment.
Industry Canada
IC ID: 649E-WEP300
Operation is subject to the following two conditions: (1) This
device may not cause interference and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
The
term “IC:” before the certification/registration number only signifies that
registration was performed based on a Declaration of Conformity indicating that
Industry Canada technical specifications were met. It does not imply that Industry
Canada approved the equipment.
The travel adapter for this headset has met UL 1310 safety requirements.
Please adhere to the following safety instructions per UL guidelines.
FAILURE
TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND
POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER
- TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR
CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE ANATTACHMENT PLUG ADAPTOR OF THE
PROPERCONFIGURATION FOR THE POWER OUTLET.
THIS POWER UNIT IS INTENDED TO
BE CORRECTLY ORIENTATED IN A VERTICAL, HORIZONTAL, OR FLOOR MOUNT POSITION.
Changes or modifications made in the radio phone, not expressly
approved by Samsung, will void the user’s authority to operate the equipment.
Only use approved batteries, antennas and chargers. The use of any unauthorized accessories
may be dangerous and void the phone warranty if said accessories cause damage
or a defect to the phone. Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting
on it.
Samsung warrants this product as free of defects in material,
design and workmanship for the period of one year from the original date of
purchase. (Depending on your country, the length of warranty may vary.)
If
during the period of warranty this product proves defective under normal use
and service you should return the product to the retailer from whom it was originally
purchased or qualified service center. The liability of Samsung and its appointed
maintenance company is limited to the cost of repair and/or replacement of the
unit under warranty.
- The warranty is limited to the original purchaser
- A copy of your receipt or other proof of purchase is required for
a proper warranty service
- The warranty is void if the serial number, date code label or product
label is removed, or if the product has been subject to physical abuse,
improper installation modification, or repair by unauthorized third
parties
- Specifically exempt from any warranty are limited-life consumable
components such as batteries and other accessories
- Samsung will not assume any responsibility for any loss or damage
incurred in shipping. All repair work on Samsung products by unauthorized
third parties voids any warranty
|

|
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at the
end of its working life.
|
|
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product should not
be mixed with other commercial wastes for disposal.
|
|
Item
|
Specifications and description
|
|
Versions
|
Compatible with Bluetooth 2.0 or earlier
|
|
Profile
|
Headset Profile, Hands-Free Profile
|
|
Operating range
|
Up to 30 feet (10 meters)
|
|
Maximum Standby time
|
Up to 80 hours*
|
|
Maximum Active time
|
Up to 5 hours*
|
* Depending on the phone type and usage, the actual time may
vary.
Please
see the WEP300 User Manual, Quick Start Guide and Specifications Sheet attached.
For General Bluetooth Information and Information on Other
Bluetooth Accessories, click
here.
For A List Of Additional General FAQs
click here.
For General Accessory
FAQs click here.